SGI Onyx300 Graphics Workstations
The Onyx300 features the same modular archetecture as the Origin 300. The G-Brick provides up to 2 pipes of InfiniteReality grapics. Each pipe needs a XIO connection from an I-Brick. The left pipe (lookin from the rear) can take 2 RMs(RM9, RM10, or RM11), and the right side can have up to 4 RasterManagers. A GE16 is the standard Geometry Engine, and the Display Generators are DG6-2, DG5-8, DG5-GVO and DG5-TVO.
Each Origin 300 chassis takes up only 2U in a standard 19inch rack.
Processors from a dual 500MHz R14000 to up to as many as 32 600MHz R14000 processors!
From 1GB to 32GB of main memory per system
NUMAlink2 architecture that scales as processors are added, with 3200MB/sec bi-directional links
Can be upgraded to Onyx 300 by adding a G-Brick
2 free 64Bit PCI slots per chassis built in
Each chassis has BaseIO (IO8) with the following ports:
10/100BaseT ethernet that will do over 11MB/sec in both directions simultaneously
2 Ultra160 SCSI busses(1 internal, 1 external) for 320MB/s total SCSI bandwidth
2 high speed serial ports each capable of 450Kbps
separate console port with connection to L1 controller
Real Time interrupt input and output ports
2 USB ports
L1 USB Port(to connect to L2 or router)
Onyx 300 parts and upgrades are available on Onyx 300 Parts page.
Onyx 300 systems come with a fresh full installation of IRIX6.5.22m. Media is
not included unless otherwise noted. The latest Freeware can be loaded on request.
Onyx 300 systems come with a 90day(from receipt) warranty that covers the hardware against failure. 12 month warranty is available for an
additional 10%.
Below is a sample configuration. These are highly scalable configurations, so let us know what you are looking for.
Onyx 300 8x600 Graphics Workstation
8x600MHz R14000 processors w/4MB Secondary Cache per processor
4GB Memory
36GB Hard Drive
2 Built in 10/100BaseT ports
4 Built in Ultra160 SCSI controllers
4 Built in high speed Serial ports
4 free PCI-64 Slots
InfiniteReality3 Graphics w/GE16, 2 RM10 boards and a DG5-2
NUMAlink Cables included
IRIX6.5.22m installed
$4800
|